realAscot/qelectrotech-source-mirror
realAscot/qelectrotech-source-mirror
1
0
Fork 0
mirror of https://github.com/qelectrotech/qelectrotech-source-mirror.git synced 2025-09-13 20:23:04 +02:00
Code Packages Releases 1 Activity
qelectrotech-source-mirror/sources/createdxf.cpp

552 lines
25 KiB
C++
Raw Normal View History

Add Copyright forget part 1 git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@2793 bfdf4180-ca20-0410-9c96-a3a8aa849046
2014-01-29 19:10:05 +00:00
/*
Copyright 2006-2014 The QElectroTech Team
This file is part of QElectroTech.
QElectroTech is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
QElectroTech is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with QElectroTech. If not, see <http://www.gnu.org/licenses/>.
*/
Export to DXF Format partially added. Following entities are exported: 1. Border and title block 2. Diagram independent text items 3. Element text items 4. Conductors Following entities are not exported right now: 1. Element components 2. Terminals 3. Maybe other things also. Lot of debugging shall be required. Thank you git-svn-id: svn+ssh://svn.tuxfamily.org/svnroot/qet/qet/trunk@2718 bfdf4180-ca20-0410-9c96-a3a8aa849046
2014-01-08 16:55:16 +00:00
#include "createdxf.h"
#include <QFile>
#include <QTextStream>
#include <QMessageBox>
#include <QString>
const double Createdxf::sheetWidth = 4000;
const double Createdxf::sheetHeight = 2700;
double Createdxf::xScale = 1;
double Createdxf::yScale = 1;
Createdxf::Createdxf()
{
}
Createdxf::~Createdxf()
{
}
/* Header section of every DXF file.*/
void Createdxf::dxfBegin (QString fileName)
{
// Creation of an output stream object in text mode.
// Header section of every dxf file.
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::WriteOnly)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setIcon(QMessageBox::Warning);
errorFileOpen.setText("Error: "+fileName+" Could Not be Opened.");
errorFileOpen.setInformativeText("Close all Files and Try Again.");
errorFileOpen.exec();
exit(0);
} else {
QTextStream To_Dxf(&file);
To_Dxf << 999 << "\r\n";
To_Dxf << "QET" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "SECTION" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "HEADER" << "\r\n";
To_Dxf << 9 << "\r\n";
To_Dxf << "$ACADVER" << "\r\n";
To_Dxf << 1 << "\r\n";
To_Dxf << "AC1006" << "\r\n";
To_Dxf << 9 << "\r\n";
To_Dxf << "$INSBASE" << "\r\n";
To_Dxf << 10 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 20 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 30 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 9 << "\r\n";
To_Dxf << "$EXTMIN" << "\r\n";
To_Dxf << 10 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 20 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 9 << "\r\n";
To_Dxf << "$EXTMAX" << "\r\n";
To_Dxf << 10 << "\r\n";
To_Dxf << "4000.0" << "\r\n";
To_Dxf << 20 << "\r\n";
To_Dxf << "4000.0" << "\r\n";
To_Dxf << 9 << "\r\n";
To_Dxf << "$LIMMIN" << "\r\n";
To_Dxf << 10 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 20 << "\r\n";
To_Dxf << "0.0" << "\r\n";
To_Dxf << 9 << "\r\n";
To_Dxf << "$LIMMAX" << "\r\n";
To_Dxf << 10 << "\r\n";
To_Dxf << "4000.0" << "\r\n";
To_Dxf << 20 << "\r\n";
To_Dxf << "4000.0" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "ENDSEC" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "SECTION" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "TABLES" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "TABLE" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "VPORT" << "\r\n";
To_Dxf << 70 << "\r\n";
To_Dxf << 1 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "VPORT" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "*ACTIVE" << "\r\n";
To_Dxf << 70 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 10 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 20 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 11 << "\r\n";
To_Dxf << 1.0 << "\r\n";
To_Dxf << 21 << "\r\n";
To_Dxf << 1.0 << "\r\n";
To_Dxf << 12 << "\r\n";
To_Dxf << 2000 << "\r\n";
To_Dxf << 22 << "\r\n";
To_Dxf << 1350 << "\r\n";
To_Dxf << 13 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 23 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 14 << "\r\n";
To_Dxf << 1.0 << "\r\n";
To_Dxf << 24 << "\r\n";
To_Dxf << 1.0 << "\r\n";
To_Dxf << 15 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 25 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 16 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 26 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 36 << "\r\n";
To_Dxf << 1.0 << "\r\n";
To_Dxf << 17 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 27 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 37 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 40 << "\r\n";
To_Dxf << 2732.5 << "\r\n";
To_Dxf << 41 << "\r\n";
To_Dxf << 2.558 << "\r\n";
To_Dxf << 42 << "\r\n";
To_Dxf << 50.0 << "\r\n";
To_Dxf << 43 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 44 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 50 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 51 << "\r\n";
To_Dxf << 0.0 << "\r\n";
To_Dxf << 71 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 72 << "\r\n";
To_Dxf << 100 << "\r\n";
To_Dxf << 73 << "\r\n";
To_Dxf << 1 << "\r\n";
To_Dxf << 74 << "\r\n";
To_Dxf << 1 << "\r\n";
To_Dxf << 75 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 76 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 77 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 78 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "ENDTAB" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "TABLE" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "LTYPE" << "\r\n";
To_Dxf << 70 << "\r\n";
To_Dxf << 1 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "LTYPE" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "CONTINUOUS" << "\r\n";
To_Dxf << 70 << "\r\n";
To_Dxf << 64 << "\r\n";
To_Dxf << 3 << "\r\n";
To_Dxf << "Solid Line" << "\r\n";
To_Dxf << 72 << "\r\n";
To_Dxf << 65 << "\r\n";
To_Dxf << 73 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << 40 << "\r\n";
To_Dxf << 0.00 << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "ENDTAB" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "ENDSEC" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "SECTION" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "BLOCKS" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "ENDSEC" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "SECTION" << "\r\n";
To_Dxf << 2 << "\r\n";
To_Dxf << "ENTITIES" << "\r\n";
file.close();
}
}
}
/* End Section of every DXF File*/
void Createdxf::dxfEnd (QString fileName)
{
// Creation of an output stream object in text mode.
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
To_Dxf << 0 << "\r\n";
To_Dxf << "ENDSEC" << "\r\n";
To_Dxf << 0 << "\r\n";
To_Dxf << "EOF";
file.close();
}
}
}
/* draw circle in dxf format*/
void Createdxf::drawCircle (QString fileName, double radius, double x, double y, int colour)
{
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
// Draw the circle
To_Dxf << 0 << "\r\n";
To_Dxf << "CIRCLE" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n"; // XYZ is the Center point of circle
To_Dxf << x << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 40 << "\r\n";
To_Dxf << radius << "\r\n"; // radius of circle
file.close();
}
}
}
/* draw line in DXF Format*/
void Createdxf::drawLine (QString fileName, double x1, double y1, double x2, double y2, int colour)
{
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
// Draw the Line
To_Dxf << 0 << "\r\n";
To_Dxf << "LINE" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n";
To_Dxf << x1 << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y1 << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 11 << "\r\n";
To_Dxf << x2 << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 21 << "\r\n";
To_Dxf << y2 << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 31 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
file.close();
}
}
}
/* draw rectangle in dxf format */
void Createdxf::drawRectangle (QString fileName, double x1, double y1, double width, double height, int colour)
{
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
// Draw the Rectangle
To_Dxf << 0 << "\r\n";
To_Dxf << "LINE" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n";
To_Dxf << x1 << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y1 << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 11 << "\r\n";
To_Dxf << x1+width << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 21 << "\r\n";
To_Dxf << y1 << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 31 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 0 << "\r\n";
To_Dxf << "LINE" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n";
To_Dxf << x1 << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y1 << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 11 << "\r\n";
To_Dxf << x1 << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 21 << "\r\n";
To_Dxf << y1+height << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 31 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 0 << "\r\n";
To_Dxf << "LINE" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n";
To_Dxf << x1+width << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y1 << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 11 << "\r\n";
To_Dxf << x1+width << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 21 << "\r\n";
To_Dxf << y1+height << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 31 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 0 << "\r\n";
To_Dxf << "LINE" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n";
To_Dxf << x1 << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y1+height << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 11 << "\r\n";
To_Dxf << x1+width << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 21 << "\r\n";
To_Dxf << y1+height << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 31 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
file.close();
}
}
}
/* draw arc in dx format */
void Createdxf::drawArc(QString fileName,double x,double y,double rad,double startAngle,double endAngle,int color)
{
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
// Draw the arc
To_Dxf << 0 << "\r\n";
To_Dxf << "ARC" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << color << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n"; // XYZ is the Center point of circle
To_Dxf << x << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 40 << "\r\n";
To_Dxf << rad << "\r\n"; // radius of arc
To_Dxf << 50 << "\r\n";
To_Dxf << startAngle<< "\r\n"; // start angle
To_Dxf << 51 << "\r\n";
To_Dxf << endAngle << "\r\n"; // end angle
file.close();
}
}
}
/* draw simple text in dxf format without any alignment specified */
void Createdxf::drawText(QString fileName, QString text,double x, double y, double height, double rotation, int colour)
{
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
// Draw the circle
To_Dxf << 0 << "\r\n";
To_Dxf << "TEXT" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n"; // XYZ
To_Dxf << x << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 40 << "\r\n";
To_Dxf << height << "\r\n"; // Text Height
To_Dxf << 1 << "\r\n";
To_Dxf << text << "\r\n"; // Text Value
To_Dxf << 50 << "\r\n";
To_Dxf << rotation << "\r\n"; // Text Rotation
file.close();
}
}
}
/* draw aligned text in DXF Format */
void Createdxf::drawTextAligned(QString fileName, QString text,double x, double y, double height, double rotation, double oblique,int hAlign, int vAlign, double xAlign,int colour,
float scale)
{
if (!fileName.isEmpty()) {
QFile file(fileName);
if (!file.open(QFile::Append)) {
// error message
QMessageBox errorFileOpen;
errorFileOpen.setText("Error: File "+fileName+" was not written correctly.");
errorFileOpen.setInformativeText("Close all Files and Re-Run");
errorFileOpen.exec();
} else {
QTextStream To_Dxf(&file);
// Draw the circle
To_Dxf << 0 << "\r\n";
To_Dxf << "TEXT" << "\r\n";
To_Dxf << 8 << "\r\n";
To_Dxf << 0 << "\r\n"; // Layer number (default layer in autocad)
To_Dxf << 62 << "\r\n";
To_Dxf << colour << "\r\n"; // Colour Code
To_Dxf << 10 << "\r\n"; // XYZ
To_Dxf << x << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 20 << "\r\n";
To_Dxf << y << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 30 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
To_Dxf << 40 << "\r\n";
To_Dxf << height << "\r\n"; // Text Height
To_Dxf << 1 << "\r\n";
To_Dxf << text << "\r\n"; // Text Value
To_Dxf << 50 << "\r\n";
To_Dxf << rotation << "\r\n"; // Text Rotation
To_Dxf << 51 << "\r\n";
To_Dxf << oblique << "\r\n"; // Text Obliqueness
To_Dxf << 72 << "\r\n";
// If "Fit to width", then check if width of text < width specified then change it "center align"
if (hAlign == 5) {
int xDiff = xAlign - x;
if (text.length() < xDiff/height) {
hAlign = 1;
xAlign = (x+xAlign) / 2;
}
}
To_Dxf << hAlign << "\r\n"; // Text Horizontal Alignment
To_Dxf << 73 << "\r\n";
To_Dxf << vAlign << "\r\n"; // Text Vertical Alignment
if ((hAlign) || (vAlign)) { // Enter Second Point
To_Dxf << 11 << "\r\n"; // XYZ
To_Dxf << xAlign << "\r\n"; // X in UCS (User Coordinate System)coordinates
To_Dxf << 21 << "\r\n";
To_Dxf << y << "\r\n"; // Y in UCS (User Coordinate System)coordinates
To_Dxf << 31 << "\r\n";
To_Dxf << 0.0 << "\r\n"; // Z in UCS (User Coordinate System)coordinates
}
file.close();
}
}
}
Copy Permalink