realAscot/kicad-source
1
0
Fork 0
mirror of https://gitlab.com/kicad/code/kicad.git synced 2025-09-15 02:33:15 +02:00
Code Issues Packages Projects Releases Wiki Activity
kicad-source/pcbnew/pcbplot.cpp
Marco Mattila 9dc9cc1f78 Board manufacturers typically do not print silkscreen on areas without 
soldermask. Nevertheless, it would be nice to have proper gerbers to
begin with, i.e., gerbers with no silkscreen in soldermaskless areas.
Of course, most of the problem can be taken care of by drawing the
footprints properly. However, sometimes the silkscreen of one
footprint ends up on the pads of another one (think components under a
so-dimm card, for example). The attached patch adds an option to
subtract the soldermask from the silkscreen when doing gerber output.

marco
2010-12-06 16:05:12 -06:00

766 lines
24 KiB
C++
Raw Blame History

/***************/
/* pcbplot.cpp */
/***************/
#include "fctsys.h"
#include "appl_wxstruct.h"
#include "common.h"
#include "plot_common.h"
#include "confirm.h"
#include "gestfich.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "pcbplot.h"
#include "worksheet.h"
#include "pcbnew_id.h"
#include "protos.h"
#include "pcbstruct.h"
#include "class_board_design_settings.h"
#include "dialog_plot_base.h"
#define PLOT_DEFAULT_MARGE 300 // mils
/* Keywords to r/w options in m_Config */
#define OPTKEY_EDGELAYER_GERBER wxT( "EdgeLayerGerberOpt" )
#define OPTKEY_GERBER_EXTENSIONS wxT( "GerberOptUseLayersExt" )
#define OPTKEY_XFINESCALE_ADJ wxT( "PlotXFineScaleAdj" )
#define OPTKEY_YFINESCALE_ADJ wxT( "PlotYFineScaleAdj" )
#define OPTKEY_PADS_ON_SILKSCREEN wxT( "PlotPadsOnSilkscreen" )
#define OPTKEY_OUTPUT_FORMAT wxT( "PlotOutputFormat" )
// Define min and max reasonable values for print scale
#define MIN_SCALE 0.01
#define MAX_SCALE 100.0
// PCB_Plot_Options constructor: set the default values for plot options:
PCB_Plot_Options::PCB_Plot_Options()
{
subtractMaskFromSilk = true;
Sel_Texte_Reference = true;
Sel_Texte_Valeur = true;
Sel_Texte_Divers = true;
DrillShapeOpt = PCB_Plot_Options::SMALL_DRILL_SHAPE;
Trace_Mode = FILLED;
Scale = 1.0;
ScaleAdjX = 1.0;
ScaleAdjY = 1.0;
PlotScaleOpt = 1;
outputDirectory = wxT( "" );
}
static long s_SelectedLayers = LAYER_BACK | LAYER_FRONT |
SILKSCREEN_LAYER_FRONT | SILKSCREEN_LAYER_BACK;
static bool s_PlotOriginIsAuxAxis = FALSE;
/* The group of plot options - sadly global XXX */
PCB_Plot_Options g_pcb_plot_options;
extern int g_DrawDefaultLineThickness;
/*******************************/
/* Dialog box for plot control */
/*******************************/
class DIALOG_PLOT : public DIALOG_PLOT_BASE
{
public:
WinEDA_PcbFrame* m_Parent;
wxConfig* m_Config;
wxCheckBox* m_BoxSelectLayer[LAYER_COUNT]; // wxCheckBox list to select/deselec layers to plot
double m_XScaleAdjust;
double m_YScaleAdjust;
bool useA4()
{
return m_PlotFormatOpt->GetSelection() == 3;
}
/**
* Function getFormat
* returns one of the values from the PlotFormat enum. If the 4th
* radio button is selected, map this back to postscript.
*/
PlotFormat getFormat()
{
int radioNdx = m_PlotFormatOpt->GetSelection();
// change the A4 to the simple postscript, according to the
// PlotFormat enum
switch( radioNdx )
{
case 3:
radioNdx = PLOT_FORMAT_POST;
break;
case 4:
radioNdx = PLOT_FORMAT_DXF;
break;
}
return PlotFormat( radioNdx );
}
public:
DIALOG_PLOT( WinEDA_PcbFrame* parent );
private:
void Init_Dialog();
void Plot( wxCommandEvent& event );
void OnQuit( wxCommandEvent& event );
void OnClose( wxCloseEvent& event );
void OnOutputDirectoryBrowseClicked( wxCommandEvent& event );
void SetPlotFormat( wxCommandEvent& event );
void OnSetScaleOpt( wxCommandEvent& event );
void SaveOptPlot( wxCommandEvent& event );
void CreateDrillFile( wxCommandEvent& event );
};
const int UNITS_MILS = 1000;
DIALOG_PLOT::DIALOG_PLOT( WinEDA_PcbFrame* parent ) :
DIALOG_PLOT_BASE( parent )
{
m_Parent = parent;
m_Config = wxGetApp().m_EDA_Config;
Init_Dialog();
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
void DIALOG_PLOT::Init_Dialog()
{
wxString msg;
wxFileName fileName;
BOARD* board = m_Parent->GetBoard();
m_Config->Read( OPTKEY_OUTPUT_FORMAT, &g_pcb_plot_options.PlotFormat );
m_Config->Read( OPTKEY_EDGELAYER_GERBER, &g_pcb_plot_options.Exclude_Edges_Pcb );
m_Config->Read( OPTKEY_XFINESCALE_ADJ, &m_XScaleAdjust );
m_Config->Read( OPTKEY_YFINESCALE_ADJ, &m_YScaleAdjust );
m_PlotFormatOpt->SetSelection( g_pcb_plot_options.PlotFormat );
g_pcb_plot_options.PlotLine_Width = g_DrawDefaultLineThickness;
// Set units and value for HPGL pen speed.
AddUnitSymbol( *m_textPenSize, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, g_pcb_plot_options.HPGL_Pen_Diam, UNITS_MILS );
m_HPGLPenSizeOpt->AppendText( msg );
// Set units to cm for standard HPGL pen speed.
msg = ReturnStringFromValue( UNSCALED_UNITS, g_pcb_plot_options.HPGL_Pen_Speed, 1 );
m_HPGLPenSpeedOpt->AppendText( msg );
// Set units and value for HPGL pen overlay.
AddUnitSymbol( *m_textPenOvr, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit,
g_pcb_plot_options.HPGL_Pen_Recouvrement,
UNITS_MILS );
m_HPGLPenOverlayOpt->AppendText( msg );
msg = ReturnStringFromValue( g_UserUnit,
g_pcb_plot_options.PlotLine_Width,
PCB_INTERNAL_UNIT );
m_LinesWidth->AppendText( msg );
if( s_PlotOriginIsAuxAxis )
m_Choice_Plot_Offset->SetSelection( 1 );
// Create scale adjust option
m_XScaleAdjust = m_YScaleAdjust = 1.0;
// Test for a reasonable scale value. Set to 1 if problem
if( m_XScaleAdjust < MIN_SCALE || m_YScaleAdjust < MIN_SCALE
|| m_XScaleAdjust > MAX_SCALE || m_YScaleAdjust > MAX_SCALE )
m_XScaleAdjust = m_YScaleAdjust = 1.0;
msg.Printf( wxT( "%f" ), m_XScaleAdjust );
m_FineAdjustXscaleOpt->AppendText( msg );
msg.Printf( wxT( "%f" ), m_YScaleAdjust );
m_FineAdjustYscaleOpt->AppendText( msg );
m_Plot_PS_Negative->SetValue( g_pcb_plot_options.Plot_PS_Negative );
// Create layer list.
int layer;
wxString layerKey;
for( layer = 0; layer < NB_LAYERS; ++layer )
{
if( !board->IsLayerEnabled( layer ) )
m_BoxSelectLayer[layer] = NULL;
else
m_BoxSelectLayer[layer] =
new wxCheckBox( this, -1, board->GetLayerName( layer ) );
}
// Add wxCheckBoxes in layers lists dialog
// List layers in same order than in setup layers dialog
// (Front or Top to Back or Bottom)
DECLARE_LAYERS_ORDER_LIST(layersOrder);
for( int layer_idx = 0; layer_idx < NB_LAYERS; ++layer_idx )
{
layer = layersOrder[layer_idx];
wxASSERT(layer < NB_LAYERS);
if( m_BoxSelectLayer[layer] == NULL )
continue;
if( layer < NB_COPPER_LAYERS )
m_CopperLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
else
m_TechnicalLayersBoxSizer->Add( m_BoxSelectLayer[layer],
0, wxGROW | wxALL, 1 );
layerKey.Printf( OPTKEY_LAYERBASE, layer );
bool option;
if( m_Config->Read( layerKey, &option ) )
m_BoxSelectLayer[layer]->SetValue( option );
else
{
long mask = 1 << layer;
if( mask & s_SelectedLayers )
m_BoxSelectLayer[layer]->SetValue( true );
}
}
// Option for using proper Gerber extensions
long ltmp;
m_Config->Read( OPTKEY_GERBER_EXTENSIONS, &ltmp );
m_Use_Gerber_Extensions->SetValue( ltmp );
// Option for excluding contents of "Edges Pcb" layer
m_Exclude_Edges_Pcb->SetValue( g_pcb_plot_options.Exclude_Edges_Pcb );
m_SubtractMaskFromSilk->SetValue( g_pcb_plot_options.GetSubtractMaskFromSilk() );
// Option to plot page references:
if( m_Parent->m_Print_Sheet_Ref )
{
m_Plot_Sheet_Ref->SetValue( g_pcb_plot_options.Plot_Frame_Ref );
}
else
{
m_Plot_Sheet_Ref->Enable( false );
g_pcb_plot_options.Plot_Frame_Ref = false;
}
// Option to plot pads on silkscreen layers or all layers
m_Config->Read( OPTKEY_PADS_ON_SILKSCREEN,
&g_pcb_plot_options.PlotPadsOnSilkLayer );
m_Plot_Pads_on_Silkscreen->SetValue( g_pcb_plot_options.PlotPadsOnSilkLayer );
// Options to plot texts on footprints
m_Plot_Text_Value->SetValue( g_pcb_plot_options.Sel_Texte_Valeur );
m_Plot_Text_Ref->SetValue( g_pcb_plot_options.Sel_Texte_Reference );
m_Plot_Text_Div->SetValue( g_pcb_plot_options.Sel_Texte_Divers );
m_Plot_Invisible_Text->SetValue( g_pcb_plot_options.Sel_Texte_Invisible );
// Options to plot pads and vias holes
m_Drill_Shape_Opt->SetSelection( g_pcb_plot_options.DrillShapeOpt );
// Scale option
m_Scale_Opt->SetSelection( g_pcb_plot_options.PlotScaleOpt );
// Plot mode
m_PlotModeOpt->SetSelection( g_pcb_plot_options.Trace_Mode );
// Plot mirror option
m_PlotMirorOpt->SetValue( g_pcb_plot_options.Plot_Set_MIROIR );
// Put vias on mask layer
m_PlotNoViaOnMaskOpt->SetValue( g_pcb_plot_options.DrawViaOnMaskLayer );
// Output directory
if( g_pcb_plot_options.GetOutputDirectory().IsEmpty() )
{
fileName = m_Parent->GetScreen()->m_FileName;
m_OutputDirectory->SetValue( fileName.GetPath() );
}
else
{
m_OutputDirectory->SetValue( g_pcb_plot_options.GetOutputDirectory() );
}
// Update options values:
wxCommandEvent cmd_event;
SetPlotFormat( cmd_event );
OnSetScaleOpt( cmd_event );
// without this line, the ESC key does not work
SetFocus();
}
void DIALOG_PLOT::OnQuit( wxCommandEvent& WXUNUSED(event) )
{
Close( true ); // true is to force the frame to close
}
void DIALOG_PLOT::OnClose( wxCloseEvent& event )
{
EndModal( 0 );
}
void DIALOG_PLOT::CreateDrillFile( wxCommandEvent& event )
{
( (WinEDA_PcbFrame*) m_Parent )->InstallDrillFrame( event );
}
void DIALOG_PLOT::OnSetScaleOpt( wxCommandEvent& event )
{
/* Disable sheet reference for scale != 1:1 */
bool scale1 = ( m_Scale_Opt->GetSelection() == 1 );
m_Plot_Sheet_Ref->Enable( scale1 );
if( !scale1 )
m_Plot_Sheet_Ref->SetValue( false );
}
void DIALOG_PLOT::OnOutputDirectoryBrowseClicked( wxCommandEvent& event )
{
wxString currentDir;
currentDir = m_OutputDirectory->GetValue();
wxDirDialog dirDialog( this, _( "Select Output Directory" ), currentDir );
if( dirDialog.ShowModal() == wxID_CANCEL )
return;
m_OutputDirectory->SetValue( dirDialog.GetPath() );
}
void DIALOG_PLOT::SetPlotFormat( wxCommandEvent& event )
{
int format = getFormat();
switch( format )
{
case PLOT_FORMAT_POST:
default:
m_Drill_Shape_Opt->Enable( true );
m_PlotModeOpt->Enable( true );
m_PlotMirorOpt->Enable( true );
m_Choice_Plot_Offset->Enable( false );
m_LinesWidth->Enable( true );
m_HPGLPenSizeOpt->Enable( false );
m_HPGLPenSpeedOpt->Enable( false );
m_HPGLPenOverlayOpt->Enable( false );
m_Exclude_Edges_Pcb->SetValue( false );
m_Exclude_Edges_Pcb->Enable( false );
m_SubtractMaskFromSilk->Enable( false );
m_Use_Gerber_Extensions->Enable( false );
m_Scale_Opt->Enable( true );
m_FineAdjustXscaleOpt->Enable( true );
m_FineAdjustYscaleOpt->Enable( true );
m_Plot_PS_Negative->Enable( true );
break;
case PLOT_FORMAT_GERBER:
m_Drill_Shape_Opt->Enable( false );
m_PlotModeOpt->SetSelection( 1 );
m_PlotModeOpt->Enable( false );
m_PlotMirorOpt->SetValue( false );
m_PlotMirorOpt->Enable( false );
m_Choice_Plot_Offset->Enable( true );
m_LinesWidth->Enable( true );
m_HPGLPenSizeOpt->Enable( false );
m_HPGLPenSpeedOpt->Enable( false );
m_HPGLPenOverlayOpt->Enable( false );
m_Exclude_Edges_Pcb->Enable( true );
m_SubtractMaskFromSilk->Enable( true );
m_Use_Gerber_Extensions->Enable( true );
m_Scale_Opt->SetSelection( 1 );
m_Scale_Opt->Enable( false );
m_FineAdjustXscaleOpt->Enable( false );
m_FineAdjustYscaleOpt->Enable( false );
m_Plot_PS_Negative->SetValue( false );
m_Plot_PS_Negative->Enable( false );
break;
case PLOT_FORMAT_HPGL:
m_PlotMirorOpt->Enable( true );
m_Drill_Shape_Opt->Enable( false );
m_PlotModeOpt->Enable( true );
m_Choice_Plot_Offset->Enable( false );
m_LinesWidth->Enable( false );
m_HPGLPenSizeOpt->Enable( true );
m_HPGLPenSpeedOpt->Enable( true );
m_HPGLPenOverlayOpt->Enable( true );
m_Exclude_Edges_Pcb->SetValue( false );
m_Exclude_Edges_Pcb->Enable( false );
m_SubtractMaskFromSilk->Enable( false );
m_Use_Gerber_Extensions->Enable( false );
m_Scale_Opt->Enable( true );
m_FineAdjustXscaleOpt->Enable( false );
m_FineAdjustYscaleOpt->Enable( false );
m_Plot_PS_Negative->SetValue( false );
m_Plot_PS_Negative->Enable( false );
break;
case PLOT_FORMAT_DXF:
m_PlotMirorOpt->Enable( false );
m_PlotMirorOpt->SetValue( false );
m_Drill_Shape_Opt->Enable( false );
m_PlotModeOpt->Enable( true );
m_Choice_Plot_Offset->Enable( false );
m_LinesWidth->Enable( false );
m_HPGLPenSizeOpt->Enable( false );
m_HPGLPenSpeedOpt->Enable( false );
m_HPGLPenOverlayOpt->Enable( false );
m_Exclude_Edges_Pcb->SetValue( false );
m_Exclude_Edges_Pcb->Enable( false );
m_SubtractMaskFromSilk->Enable( false );
m_Use_Gerber_Extensions->Enable( false );
m_Scale_Opt->Enable( false );
m_Scale_Opt->SetSelection( 1 );
m_FineAdjustXscaleOpt->Enable( false );
m_FineAdjustYscaleOpt->Enable( false );
m_Plot_PS_Negative->SetValue( false );
m_Plot_PS_Negative->Enable( false );
break;
}
g_pcb_plot_options.PlotFormat = format;
}
void DIALOG_PLOT::SaveOptPlot( wxCommandEvent& event )
{
g_pcb_plot_options.Exclude_Edges_Pcb = m_Exclude_Edges_Pcb->GetValue();
g_pcb_plot_options.SetSubtractMaskFromSilk( m_SubtractMaskFromSilk->GetValue() );
if( m_Plot_Sheet_Ref )
g_pcb_plot_options.Plot_Frame_Ref = m_Plot_Sheet_Ref->GetValue();
g_pcb_plot_options.PlotPadsOnSilkLayer = m_Plot_Pads_on_Silkscreen->GetValue();
s_PlotOriginIsAuxAxis =
(m_Choice_Plot_Offset->GetSelection() == 0) ? FALSE : TRUE;
g_pcb_plot_options.Sel_Texte_Valeur = m_Plot_Text_Value->GetValue();
g_pcb_plot_options.Sel_Texte_Reference = m_Plot_Text_Ref->GetValue();
g_pcb_plot_options.Sel_Texte_Divers = m_Plot_Text_Div->GetValue();
g_pcb_plot_options.Sel_Texte_Invisible = m_Plot_Invisible_Text->GetValue();
g_pcb_plot_options.PlotScaleOpt = m_Scale_Opt->GetSelection();
g_pcb_plot_options.DrillShapeOpt =
(PCB_Plot_Options::DrillShapeOptT) m_Drill_Shape_Opt->GetSelection();
g_pcb_plot_options.Plot_Set_MIROIR = m_PlotMirorOpt->GetValue();
if( g_pcb_plot_options.Plot_Set_MIROIR )
g_pcb_plot_options.PlotOrient = PLOT_MIROIR;
else
g_pcb_plot_options.PlotOrient = 0;
g_pcb_plot_options.Trace_Mode = (GRTraceMode) m_PlotModeOpt->GetSelection();
g_pcb_plot_options.DrawViaOnMaskLayer = m_PlotNoViaOnMaskOpt->GetValue();
wxString msg = m_HPGLPenSizeOpt->GetValue();
int tmp = ReturnValueFromString( g_UserUnit, msg, UNITS_MILS );
g_pcb_plot_options.HPGL_Pen_Diam = tmp;
msg = m_HPGLPenSpeedOpt->GetValue();
tmp = ReturnValueFromString( MILLIMETRES, msg, 1 );
g_pcb_plot_options.HPGL_Pen_Speed = tmp;
msg = m_HPGLPenOverlayOpt->GetValue();
tmp = ReturnValueFromString( g_UserUnit, msg, UNITS_MILS );
g_pcb_plot_options.HPGL_Pen_Recouvrement = tmp;
msg = m_LinesWidth->GetValue();
tmp = ReturnValueFromString( g_UserUnit, msg, PCB_INTERNAL_UNIT );
g_pcb_plot_options.PlotLine_Width = tmp;
g_DrawDefaultLineThickness = g_pcb_plot_options.PlotLine_Width;
msg = m_FineAdjustXscaleOpt->GetValue();
msg.ToDouble( &m_XScaleAdjust );
msg = m_FineAdjustYscaleOpt->GetValue();
msg.ToDouble( &m_YScaleAdjust );
m_Config->Write( OPTKEY_EDGELAYER_GERBER,
g_pcb_plot_options.Exclude_Edges_Pcb );
m_Config->Write( OPTKEY_GERBER_EXTENSIONS,
m_Use_Gerber_Extensions->GetValue() );
m_Config->Write( OPTKEY_XFINESCALE_ADJ, m_XScaleAdjust );
m_Config->Write( OPTKEY_YFINESCALE_ADJ, m_YScaleAdjust );
m_Config->Write( OPTKEY_PADS_ON_SILKSCREEN,
g_pcb_plot_options.PlotPadsOnSilkLayer );
int formatNdx = m_PlotFormatOpt->GetSelection();
m_Config->Write( OPTKEY_OUTPUT_FORMAT, formatNdx );
wxString layerKey;
for( int layer = 0; layer<NB_LAYERS; ++layer )
{
if( m_BoxSelectLayer[layer] == NULL )
continue;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
m_Config->Write( layerKey, m_BoxSelectLayer[layer]->IsChecked() );
}
g_pcb_plot_options.Plot_PS_Negative = m_Plot_PS_Negative->GetValue();
g_pcb_plot_options.SetOutputDirectory( m_OutputDirectory->GetValue() );
}
void DIALOG_PLOT::Plot( wxCommandEvent& event )
{
int layer;
wxFileName fn;
wxString ext;
BOARD* board = m_Parent->GetBoard();
SaveOptPlot( event );
// Create output directory if it does not exist
if( !wxFileName::DirExists( m_OutputDirectory->GetValue() ) )
{
if( wxMkdir( m_OutputDirectory->GetValue() ) )
{
wxString msg;
msg.Printf( _( "Directory %s created.\n" ), GetChars( m_OutputDirectory->GetValue() ) );
m_MessagesBox->AppendText( msg );
}
else
{
wxMessageBox( _( "Cannot create output directory!" ), _( "Plot" ), wxICON_INFORMATION );
return;
}
}
switch( g_pcb_plot_options.PlotScaleOpt )
{
default:
g_pcb_plot_options.Scale = 1;
break;
case 2:
g_pcb_plot_options.Scale = 1.5;
break;
case 3:
g_pcb_plot_options.Scale = 2;
break;
case 4:
g_pcb_plot_options.Scale = 3;
break;
}
/* If the scale factor edit controls are disabled or the scale value
* is 0, don't adjust the base scale factor. This fixes a bug when
* the default scale adjust is initialized to 0 and saved in program
* settings resulting in a divide by zero fault.
*/
if( m_FineAdjustXscaleOpt - IsEnabled()
&& m_XScaleAdjust != 0.0 )
g_pcb_plot_options.ScaleAdjX = m_XScaleAdjust;
if( m_FineAdjustYscaleOpt->IsEnabled()
&& m_YScaleAdjust != 0.0 )
g_pcb_plot_options.ScaleAdjY = m_YScaleAdjust;
int format = getFormat();
switch( format )
{
case PLOT_FORMAT_POST:
ext = wxT( "ps" );
break;
case PLOT_FORMAT_GERBER:
g_pcb_plot_options.Scale = 1.0; // No scale option allowed in gerber format
ext = wxT( "pho" );
break;
case PLOT_FORMAT_HPGL:
ext = wxT( "plt" );
break;
case PLOT_FORMAT_DXF:
g_pcb_plot_options.Scale = 1.0;
ext = wxT( "dxf" );
break;
}
// Test for a reasonable scale value
if( g_pcb_plot_options.Scale < MIN_SCALE )
DisplayInfoMessage( this,
_( "Warning: Scale option set to a very small value" ) );
if( g_pcb_plot_options.Scale > MAX_SCALE )
DisplayInfoMessage( this,
_( "Warning: Scale option set to a very large value" ) );
int mask = 1;
s_SelectedLayers = 0;
for( layer = 0; layer < NB_LAYERS; layer++, mask <<= 1 )
{
if( m_BoxSelectLayer[layer] == NULL )
continue;
bool success = false;
if( m_BoxSelectLayer[layer]->GetValue() )
{
s_SelectedLayers |= mask;
fn = m_Parent->GetScreen()->m_FileName;
fn.SetPath( m_OutputDirectory->GetValue() );
// Create file name.
wxString layername = board->GetLayerName( layer );
layername.Trim( true ); layername.Trim( false ); // remove leading and trailing spaces if any
fn.SetName( fn.GetName() + wxT( "-" ) + layername );
// Use Gerber Extensions based on layer number
// (See http://en.wikipedia.org/wiki/Gerber_File)
if( (format == PLOT_FORMAT_GERBER) && m_Use_Gerber_Extensions->GetValue() )
{
switch( layer )
{
case LAYER_N_FRONT:
fn.SetExt( wxT( "gtl" ) );
break;
case LAYER_N_2:
case LAYER_N_3:
case LAYER_N_4:
case LAYER_N_5:
case LAYER_N_6:
case LAYER_N_7:
case LAYER_N_8:
case LAYER_N_9:
case LAYER_N_10:
case LAYER_N_11:
case LAYER_N_12:
case LAYER_N_13:
case LAYER_N_14:
case LAYER_N_15:
// TODO: see if we use .gbr or a layer identifier (gb1 .. gbnn ?)
// according to the new internal layers designation
// (1 is the first internal layer from the front layer)
fn.SetExt( wxT( "gbr" ) );
break;
case LAYER_N_BACK:
fn.SetExt( wxT( "gbl" ) );
break;
case ADHESIVE_N_BACK:
fn.SetExt( wxT( "gba" ) );
break;
case ADHESIVE_N_FRONT:
fn.SetExt( wxT( "gta" ) );
break;
case SOLDERPASTE_N_BACK:
fn.SetExt( wxT( "gbp" ) );
break;
case SOLDERPASTE_N_FRONT:
fn.SetExt( wxT( "gtp" ) );
break;
case SILKSCREEN_N_BACK:
fn.SetExt( wxT( "gbo" ) );
break;
case SILKSCREEN_N_FRONT:
fn.SetExt( wxT( "gto" ) );
break;
case SOLDERMASK_N_BACK:
fn.SetExt( wxT( "gbs" ) );
break;
case SOLDERMASK_N_FRONT:
fn.SetExt( wxT( "gts" ) );
break;
case DRAW_N:
case COMMENT_N:
case ECO1_N:
case ECO2_N:
case EDGE_N:
default:
fn.SetExt( wxT( "gbr" ) );
break;
}
}
else
{
fn.SetExt( ext );
}
switch( format )
{
case PLOT_FORMAT_POST:
success = m_Parent->Genere_PS( fn.GetFullPath(), layer, useA4(),
g_pcb_plot_options.Trace_Mode );
break;
case PLOT_FORMAT_GERBER:
success = m_Parent->Genere_GERBER( fn.GetFullPath(), layer,
s_PlotOriginIsAuxAxis,
g_pcb_plot_options.Trace_Mode );
break;
case PLOT_FORMAT_HPGL:
success = m_Parent->Genere_HPGL( fn.GetFullPath(), layer,
g_pcb_plot_options.Trace_Mode );
break;
case PLOT_FORMAT_DXF:
success = m_Parent->Genere_DXF( fn.GetFullPath(), layer,
g_pcb_plot_options.Trace_Mode );
break;
}
// Print diags in messages box:
wxString msg;
if( success )
msg.Printf( _( "Plot file <%s> created" ), GetChars( fn.GetFullPath() ) );
else
msg.Printf( _( "Unable to create <%s>" ), GetChars( fn.GetFullPath() ) );
msg << wxT( "\n" );
m_MessagesBox->AppendText( msg );
}
}
// If no layer selected, we have nothing plotted.
// Prompt user if it happens
// because he could think there is a bug in pcbnew:
if( s_SelectedLayers == 0 )
DisplayError( this, _( "No layer selected" ) );
}
void WinEDA_PcbFrame::ToPlotter( wxCommandEvent& event )
{
DIALOG_PLOT* frame = new DIALOG_PLOT( this );
frame->ShowModal();
frame->Destroy();
}
Reference in New Issue View Git Blame Copy Permalink