realAscot/kicad-source
1
0
Fork 0
mirror of https://gitlab.com/kicad/code/kicad.git synced 2025-09-15 10:43:15 +02:00
Code Issues Packages Projects Releases Wiki Activity
kicad-source/pcbnew/pcbnew_config.cpp
jean-pierre charras f77121a57a Fixed compatibility with wxWidegets 2.9.1. 
Added hotkeys editor from David Turner, with a lot of enhancements and fixes
Added pins connections info in intermediate netlist for each compoment. This is redundant, but some netlist formats (ORCADPCB, PSPICE) are very easy to create with this redundant info.
2010-08-28 20:02:24 +02:00

415 lines
21 KiB
C++
Raw Blame History

/****************************************/
/** pcbnew_config.cpp : configuration **/
/****************************************/
#include "fctsys.h"
#include "appl_wxstruct.h"
#include "common.h"
#include "class_drawpanel.h"
#include "confirm.h"
#include "gestfich.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "class_board_design_settings.h"
#include "pcbplot.h"
#include "worksheet.h"
#include "pcbnew_id.h"
#include "hotkeys.h"
#include "protos.h"
#include "dialog_mask_clearance.h"
#include "dialog_general_options.h"
#include "pcbnew_config.h"
#include "dialog_hotkeys_editor.h"
#define HOTKEY_FILENAME wxT( "pcbnew" )
void WinEDA_PcbFrame::Process_Config( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
wxFileName fn;
pos = GetPosition();
pos.x += 20;
pos.y += 20;
switch( id )
{
case ID_MENU_PCB_SHOW_HIDE_LAYERS_MANAGER_DIALOG:
if( m_OptionsToolBar )
{ //This command is same as the Options Vertical Toolbar
// tool Show/hide layers manager
bool state =
m_OptionsToolBar->GetToolState( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR );
m_OptionsToolBar->ToggleTool( ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR,
!state );
wxCommandEvent event( wxEVT_COMMAND_TOOL_CLICKED,
ID_TB_OPTIONS_SHOW_MANAGE_LAYERS_VERTICAL_TOOLBAR );
wxPostEvent( this, event );
}
break;
case ID_PCB_LAYERS_SETUP:
DisplayDialogLayerSetup( this );
break;
case ID_CONFIG_REQ:
InstallConfigFrame( pos );
break;
case ID_PCB_MASK_CLEARANCE:
{
DIALOG_PADS_MASK_CLEARANCE dlg( this );
dlg.ShowModal();
}
break;
case ID_OPTIONS_SETUP:
{
Dialog_GeneralOptions dlg( this );
dlg.ShowModal();
}
break;
case ID_PCB_PAD_SETUP:
InstallPadOptionsFrame( NULL );
break;
case ID_CONFIG_SAVE:
SaveProjectSettings();
break;
case ID_CONFIG_READ:
{
fn = GetScreen()->m_FileName;
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Read Project File" ), fn.GetPath(),
fn.GetFullName(), ProjectFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
break;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg;
msg.Printf( _( "File %s not found" ), GetChars( dlg.GetPath() ) );
DisplayError( this, msg );
break;
}
LoadProjectSettings( dlg.GetPath() );
break;
}
/* Hotkey IDs */
case ID_PREFERENCES_HOTKEY_EXPORT_CONFIG:
ExportHotkeyConfigToFile( s_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_IMPORT_CONFIG:
ImportHotkeyConfigFromFile( s_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_EDITOR:
InstallHotkeyFrame( this, s_Board_Editor_Hokeys_Descr );
break;
case ID_PREFERENCES_HOTKEY_SHOW_CURRENT_LIST:
// Display current hotkey list for eeschema.
DisplayHotkeyList( this, s_Board_Editor_Hokeys_Descr );
break;
default:
DisplayError( this, wxT( "WinEDA_PcbFrame::Process_Config internal error" ) );
}
}
/**
* Read the project configuration file settings.
*
* @param aProjectFileName = The project file name to load. If aProjectFileName
* is not found load the default project file kicad.pro
* and initialize setting to their default value.
* @return Always returns true.
*/
bool WinEDA_PcbFrame::LoadProjectSettings( const wxString& aProjectFileName )
{
wxFileName fn = aProjectFileName;
if( fn.GetExt() != ProjectFileExtension )
fn.SetExt( ProjectFileExtension );
wxGetApp().RemoveLibraryPath( g_UserLibDirBuffer );
/* Initialize default values. */
g_LibName_List.Clear();
wxGetApp().ReadProjectConfig( fn.GetFullPath(), GROUP, GetProjectFileParameters(), FALSE );
/* User library path takes precedent over default library search paths. */
wxGetApp().InsertLibraryPath( g_UserLibDirBuffer, 1 );
/* Reset the items visibility flag when loading a new config
* Because it could creates SERIOUS mistakes for the user,
* if board items are not visible after loading a board...
* Grid and ratsnest can be left to their previous state
*/
bool showGrid = IsElementVisible( GRID_VISIBLE );
bool showRats = IsElementVisible( RATSNEST_VISIBLE );
SetVisibleAlls();
SetElementVisibility( GRID_VISIBLE, showGrid );
SetElementVisibility( RATSNEST_VISIBLE, showRats );
return TRUE;
}
void WinEDA_PcbFrame::SaveProjectSettings()
{
wxFileName fn;
fn = GetScreen()->m_FileName;
fn.SetExt( ProjectFileExtension );
wxFileDialog dlg( this, _( "Save Project File" ), fn.GetPath(), fn.GetFullName(),
ProjectFileWildcard, wxFD_SAVE | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return;
wxGetApp().WriteProjectConfig( dlg.GetPath(), GROUP, GetProjectFileParameters() );
}
/**
* Return project file parameter list for PCBNew.
*
* Populate the project file parameter array specific to PCBNew if it hasn't
* already been populated and return a reference to the array to the caller.
* Creating the parameter list at run time has the advantage of being able
* to define local variables. The old method of statically building the array
* at compile time requiring global variable definitions by design.
*/
PARAM_CFG_ARRAY& WinEDA_PcbFrame::GetProjectFileParameters()
{
if( !m_projectFileParams.empty() )
return m_projectFileParams;
m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "LibDir" ),&g_UserLibDirBuffer,
GROUPLIB ) );
m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ), &g_LibName_List,
GROUPLIB ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDrlX" ), &g_Pad_Master.m_Drill.x,
320, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimH" ), &g_Pad_Master.m_Size.x,
550, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimV" ), &g_Pad_Master.m_Size.y,
550, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "BoardThickness" ),
&boardDesignSettings.m_BoardThickness,
630, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_BOOL( wxT( "SgPcb45" ), &Segments_45_Only,
TRUE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbV" ),
&boardDesignSettings.m_PcbTextSize.y,
600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtPcbH" ),
&boardDesignSettings.m_PcbTextSize.x,
600, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModV" ), &g_ModuleTextSize.y,
500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModH" ), &g_ModuleTextSize.x,
500, TEXTS_MIN_SIZE, TEXTS_MAX_SIZE ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtModW" ), &g_ModuleTextWidth,
100, 1, TEXTS_MAX_WIDTH ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "VEgarde" ),
&boardDesignSettings.m_SolderMaskMargin,
100, 0, 10000 ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "DrawLar" ),
&boardDesignSettings.m_DrawSegmentWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "EdgeLar" ),
&boardDesignSettings.m_EdgeSegmentWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "TxtLar" ),
&boardDesignSettings.m_PcbTextWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "MSegLar" ), &g_ModuleSegmentWidth,
120, 0, 0xFFFF ) );
m_projectFileParams.push_back( new PARAM_CFG_WXSTRING( wxT( "LastNetListRead" ),
&m_lastNetListRead ) );
return m_projectFileParams;
}
/*
* Return the PCBNew applications settings list.
*
* This replaces the old statically define list that had the project
* file settings and the application settings mixed together. This
* was confusing and caused some settings to get saved and loaded
* incorrectly. Currently, only the settings that are needed at start
* up by the main window are defined here. There are other locally used
* settings are scattered throughout the PCBNew source code. If you need
* to define a configuration setting that need to be loaded at run time,
* this is the place to define it.
*
* @todo: Define the configuration variables as member variables instead of
* global variables or move them to the object class where they are
* used.
*/
PARAM_CFG_ARRAY& WinEDA_PcbFrame::GetConfigurationSettings()
{
if( !m_configSettings.empty() )
return m_configSettings;
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ViaSHole" ),
&DisplayOpt.m_DisplayViaMode,
VIA_SPECIAL_HOLE_SHOW, VIA_HOLE_NOT_SHOW,
OPT_VIA_HOLE_END - 1 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ShowNetNamesMode" ),
&DisplayOpt.DisplayNetNamesMode, 3, 0, 3 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "Unite" ), (int*)&g_UserUnit, MILLIMETRES ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "SegFill" ),
&DisplayOpt.DisplayPcbTrackFill, TRUE ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TrackDisplayClearance" ),
&DisplayOpt.ShowTrackClearanceMode,
SHOW_CLEARANCE_NEW_TRACKS_AND_VIA_AREAS ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadFill" ),
&DisplayOpt.DisplayPadFill, TRUE ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ViaFill" ),
&DisplayOpt.DisplayViaFill, TRUE ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadAffG" ),
&DisplayOpt.DisplayPadIsol, TRUE ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "PadSNum" ),
&DisplayOpt.DisplayPadNum, TRUE ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffC" ),
&DisplayOpt.DisplayModEdge, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "ModAffT" ),
&DisplayOpt.DisplayModText, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "PcbAffT" ),
&DisplayOpt.DisplayDrawItems, FILLED, 0, 2 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay0" ), LOC_COLOR( 0 ),
GREEN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay1" ), LOC_COLOR( 1 ),
BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay2" ), LOC_COLOR( 2 ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay3" ), LOC_COLOR( 3 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay4" ), LOC_COLOR( 4 ),
4 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay5" ), LOC_COLOR( 5 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay6" ), LOC_COLOR( 6 ),
6 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay7" ), LOC_COLOR( 7 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay8" ), LOC_COLOR( 8 ),
7 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLay9" ), LOC_COLOR( 9 ),
1 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayA" ), LOC_COLOR( 10 ),
2 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayB" ), LOC_COLOR( 11 ),
3 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayC" ), LOC_COLOR( 12 ),
12 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayD" ), LOC_COLOR( 13 ),
13 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayE" ), LOC_COLOR( 14 ),
14 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayF" ), LOC_COLOR( 15 ),
RED ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayG" ), LOC_COLOR( 16 ),
1 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayH" ), LOC_COLOR( 17 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayI" ), LOC_COLOR( 18 ),
11 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayJ" ), LOC_COLOR( 19 ),
4 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayK" ), LOC_COLOR( 20 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayL" ), LOC_COLOR( 21 ),
3 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayM" ), LOC_COLOR( 22 ),
6 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayN" ), LOC_COLOR( 23 ),
5 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayO" ), LOC_COLOR( 24 ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayP" ), LOC_COLOR( 25 ),
1 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayQ" ), LOC_COLOR( 26 ),
2 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayR" ), LOC_COLOR( 27 ),
14 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayS" ), LOC_COLOR( 28 ),
YELLOW ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayT" ), LOC_COLOR( 29 ),
13 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayU" ), LOC_COLOR( 30 ),
14 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "ColLayV" ), LOC_COLOR( 31 ),
7 ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoC" ),
ITEM_COLOR( MOD_TEXT_FR_VISIBLE ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtMoS" ),
ITEM_COLOR( MOD_TEXT_BK_VISIBLE ),
BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CTxtVis" ),
ITEM_COLOR( MOD_TEXT_INVISIBLE ),
DARKGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CAncreM" ),
ITEM_COLOR( ANCHOR_VISIBLE ), BLUE ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCu" ),
ITEM_COLOR( PAD_BK_VISIBLE ), GREEN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoPadCm" ),
ITEM_COLOR( PAD_FR_VISIBLE ), RED ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaTh" ),
ITEM_COLOR( VIA_THROUGH_VISIBLE ),
LIGHTGRAY ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaBu" ),
ITEM_COLOR( VIA_BBLIND_VISIBLE ),
BROWN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoViaMi" ),
ITEM_COLOR( VIA_MICROVIA_VISIBLE ),
CYAN ) );
m_configSettings.push_back( new PARAM_CFG_SETCOLOR( true, wxT( "CoRatsN" ),
ITEM_COLOR( RATSNEST_VISIBLE ),
WHITE ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLnum" ),
&g_pcb_plot_options.HPGL_Pen_Num,
1, 1, 16 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGdiam" ),
&g_pcb_plot_options.HPGL_Pen_Diam,
15, 0, 100 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLSpd" ),
&g_pcb_plot_options.HPGL_Pen_Speed,
20, 0, 1000 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "HPGLrec" ),
&g_pcb_plot_options.HPGL_Pen_Recouvrement,
2, 0, 0x100 ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "TimeOut" ), &g_TimeOut,
600, 0, 60000 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "DPolair" ),
&DisplayOpt.DisplayPolarCood, FALSE ) );
m_configSettings.push_back( new PARAM_CFG_INT( true, wxT( "MaxLnkS" ), &g_MaxLinksShowed,
3, 0, 15 ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "ShowMRa" ),
&g_Show_Module_Ratsnest, TRUE ) );
m_configSettings.push_back( new PARAM_CFG_BOOL( true, wxT( "TwoSegT" ),
&g_TwoSegmentTrackBuild, TRUE ) );
return m_configSettings;
}
Reference in New Issue View Git Blame Copy Permalink