mirror of
https://gitlab.com/kicad/code/kicad.git
synced 2025-09-14 10:13:19 +02:00
205 lines
12 KiB
C++
205 lines
12 KiB
C++
///////////////////////////////////////////////////////////////////////////
|
|
// C++ code generated with wxFormBuilder (version 4.2.1-0-g80c4cb6a-dirty)
|
|
// http://www.wxformbuilder.org/
|
|
//
|
|
// PLEASE DO *NOT* EDIT THIS FILE!
|
|
///////////////////////////////////////////////////////////////////////////
|
|
|
|
#include "panel_setup_mask_and_paste_base.h"
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
|
|
PANEL_SETUP_MASK_AND_PASTE_BASE::PANEL_SETUP_MASK_AND_PASTE_BASE( wxWindow* parent, wxWindowID id, const wxPoint& pos, const wxSize& size, long style, const wxString& name ) : wxPanel( parent, id, pos, size, style, name )
|
|
{
|
|
wxBoxSizer* bMainSizer;
|
|
bMainSizer = new wxBoxSizer( wxVERTICAL );
|
|
|
|
wxBoxSizer* bSizer3;
|
|
bSizer3 = new wxBoxSizer( wxVERTICAL );
|
|
|
|
wxBoxSizer* bMessages;
|
|
bMessages = new wxBoxSizer( wxHORIZONTAL );
|
|
|
|
m_bitmapWarning = new wxStaticBitmap( this, wxID_ANY, wxArtProvider::GetBitmap( wxASCII_STR(wxART_WARNING), wxASCII_STR(wxART_OTHER) ), wxDefaultPosition, wxDefaultSize, 0 );
|
|
bMessages->Add( m_bitmapWarning, 0, wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, 5 );
|
|
|
|
wxBoxSizer* bSizer4;
|
|
bSizer4 = new wxBoxSizer( wxVERTICAL );
|
|
|
|
m_staticTextInfoMaskMinWidth = new wxStaticText( this, wxID_ANY, _("Consult your PCB manufacturer's specifications for solder mask expansion, web width, and clearance settings."), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_staticTextInfoMaskMinWidth->Wrap( -1 );
|
|
bSizer4->Add( m_staticTextInfoMaskMinWidth, 0, wxEXPAND, 5 );
|
|
|
|
m_staticTextInfoMaskMinWidth1 = new wxStaticText( this, wxID_ANY, _("If no specifications are provided, setting these values to zero is recommended."), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_staticTextInfoMaskMinWidth1->Wrap( -1 );
|
|
bSizer4->Add( m_staticTextInfoMaskMinWidth1, 0, wxEXPAND, 5 );
|
|
|
|
|
|
bMessages->Add( bSizer4, 1, wxEXPAND|wxLEFT, 5 );
|
|
|
|
|
|
bSizer3->Add( bMessages, 0, wxEXPAND|wxTOP|wxBOTTOM, 10 );
|
|
|
|
|
|
bSizer3->Add( 0, 5, 0, wxEXPAND, 5 );
|
|
|
|
m_stSolderMaskSettings = new wxStaticText( this, wxID_ANY, _("Solder Mask Settings"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_stSolderMaskSettings->Wrap( -1 );
|
|
m_stSolderMaskSettings->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL, false, wxEmptyString ) );
|
|
|
|
bSizer3->Add( m_stSolderMaskSettings, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 13 );
|
|
|
|
m_staticline1 = new wxStaticLine( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
|
|
bSizer3->Add( m_staticline1, 0, wxEXPAND|wxTOP|wxBOTTOM, 2 );
|
|
|
|
wxGridBagSizer* gbSizer1;
|
|
gbSizer1 = new wxGridBagSizer( 3, 5 );
|
|
gbSizer1->SetFlexibleDirection( wxBOTH );
|
|
gbSizer1->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
|
|
|
|
m_maskMarginLabel = new wxStaticText( this, wxID_ANY, _("Solder mask expansion:"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskMarginLabel->Wrap( -1 );
|
|
m_maskMarginLabel->SetToolTip( _("Global clearance between pads and the solder mask.\nThis value can be superseded by local values for a footprint or a pad.\nPositive clearance means a solder mask opening bigger than the pad (typical for solder mask clearance).") );
|
|
|
|
gbSizer1->Add( m_maskMarginLabel, wxGBPosition( 0, 0 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
|
|
|
|
m_maskMarginCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskMarginCtrl->SetToolTip( _("Global clearance between pads and the solder mask.\nThis value can be superseded by local values for a footprint or a pad.\nPositive clearance means a solder mask opening bigger than the pad (typical for solder mask clearance).") );
|
|
|
|
gbSizer1->Add( m_maskMarginCtrl, wxGBPosition( 0, 1 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_maskMarginUnits = new wxStaticText( this, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskMarginUnits->Wrap( -1 );
|
|
gbSizer1->Add( m_maskMarginUnits, wxGBPosition( 0, 2 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
|
|
|
|
m_maskMinWidthLabel = new wxStaticText( this, wxID_ANY, _("Solder mask minimum web width:"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskMinWidthLabel->Wrap( -1 );
|
|
m_maskMinWidthLabel->SetToolTip( _("Minimum distance between openings in the solder mask.\nPad openings closer than this distance will be plotted as a single opening.") );
|
|
|
|
gbSizer1->Add( m_maskMinWidthLabel, wxGBPosition( 1, 0 ), wxGBSpan( 1, 1 ), wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_maskMinWidthCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskMinWidthCtrl->SetToolTip( _("Minimum distance between openings in the solder mask.\nPad openings closer than this distance will be plotted as a single opening.") );
|
|
|
|
gbSizer1->Add( m_maskMinWidthCtrl, wxGBPosition( 1, 1 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_maskMinWidthUnits = new wxStaticText( this, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskMinWidthUnits->Wrap( -1 );
|
|
gbSizer1->Add( m_maskMinWidthUnits, wxGBPosition( 1, 2 ), wxGBSpan( 1, 1 ), wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_maskToCopperClearanceLabel = new wxStaticText( this, wxID_ANY, _("Solder mask to copper clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskToCopperClearanceLabel->Wrap( -1 );
|
|
m_maskToCopperClearanceLabel->SetToolTip( _("Minimum distance between a solder mask opening and a copper item with a different net than the solder mask opening's parent.\nDistances smaller than this minimum will create a DRC error.") );
|
|
|
|
gbSizer1->Add( m_maskToCopperClearanceLabel, wxGBPosition( 2, 0 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
|
|
|
|
m_maskToCopperClearanceCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskToCopperClearanceCtrl->SetToolTip( _("Minimum distance between a solder mask opening and a copper item with a different net than the solder mask opening's parent.\nDistances smaller than this minimum will create a DRC error.") );
|
|
|
|
gbSizer1->Add( m_maskToCopperClearanceCtrl, wxGBPosition( 2, 1 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_maskToCopperClearanceUnits = new wxStaticText( this, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_maskToCopperClearanceUnits->Wrap( -1 );
|
|
gbSizer1->Add( m_maskToCopperClearanceUnits, wxGBPosition( 2, 2 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
|
|
|
|
m_allowBridges = new wxCheckBox( this, wxID_ANY, _("Allow bridged solder mask apertures between pads within footprints"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_allowBridges->SetToolTip( _("Disable DRC error checking for solder mask aperture bridging between pads in the same footprint.") );
|
|
|
|
gbSizer1->Add( m_allowBridges, wxGBPosition( 3, 0 ), wxGBSpan( 1, 3 ), wxTOP|wxLEFT, 5 );
|
|
|
|
wxBoxSizer* bSizer6;
|
|
bSizer6 = new wxBoxSizer( wxHORIZONTAL );
|
|
|
|
m_stTenting = new wxStaticText( this, wxID_ANY, _("Tent vias:"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_stTenting->Wrap( -1 );
|
|
bSizer6->Add( m_stTenting, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
|
|
|
|
m_tentViasFront = new wxCheckBox( this, wxID_ANY, _("Front"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_tentViasFront->SetToolTip( _("Tented: vias are covered with solder mask.\nNot tented: vias are not covered with solder mask.") );
|
|
|
|
bSizer6->Add( m_tentViasFront, 0, wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, 5 );
|
|
|
|
m_tentViasBack = new wxCheckBox( this, wxID_ANY, _("Back"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_tentViasBack->SetToolTip( _("Tented: vias are covered with solder mask.\nNot tented: vias are not covered with solder mask.") );
|
|
|
|
bSizer6->Add( m_tentViasBack, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
|
|
|
|
|
|
gbSizer1->Add( bSizer6, wxGBPosition( 4, 0 ), wxGBSpan( 1, 3 ), wxEXPAND|wxTOP|wxBOTTOM, 5 );
|
|
|
|
|
|
bSizer3->Add( gbSizer1, 0, wxBOTTOM|wxEXPAND|wxTOP, 5 );
|
|
|
|
|
|
bSizer3->Add( 0, 10, 0, wxEXPAND, 5 );
|
|
|
|
m_stSolderPasteSettings = new wxStaticText( this, wxID_ANY, _("Solder Paste Settings"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_stSolderPasteSettings->Wrap( -1 );
|
|
m_stSolderPasteSettings->SetFont( wxFont( wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL, false, wxEmptyString ) );
|
|
|
|
bSizer3->Add( m_stSolderPasteSettings, 0, wxEXPAND|wxTOP|wxRIGHT|wxLEFT, 13 );
|
|
|
|
m_staticline2 = new wxStaticLine( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
|
|
bSizer3->Add( m_staticline2, 0, wxEXPAND|wxTOP|wxBOTTOM, 2 );
|
|
|
|
wxGridBagSizer* gbSizer2;
|
|
gbSizer2 = new wxGridBagSizer( 3, 5 );
|
|
gbSizer2->SetFlexibleDirection( wxBOTH );
|
|
gbSizer2->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
|
|
|
|
m_pasteMarginLabel = new wxStaticText( this, wxID_ANY, _("Solder paste absolute clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_pasteMarginLabel->Wrap( -1 );
|
|
m_pasteMarginLabel->SetToolTip( _("Global absolute clearance between pads and the solder paste.\nNegative clearance means solder paste area smaller than the pad (typical for solder paste clearance).\nThis value can be superseded by local values for a footprint or a pad.\nFinal clearance value is the sum of this value and the relative clearance value.") );
|
|
|
|
gbSizer2->Add( m_pasteMarginLabel, wxGBPosition( 0, 0 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
|
|
|
|
m_pasteMarginCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_pasteMarginCtrl->SetToolTip( _("Global absolute clearance between pads and the solder paste.\nNegative clearance means solder paste area smaller than the pad (typical for solder paste clearance).\nThis value can be superseded by local values for a footprint or a pad.\nFinal clearance value is the sum of this value and the relative clearance value.") );
|
|
|
|
gbSizer2->Add( m_pasteMarginCtrl, wxGBPosition( 0, 1 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_pasteMarginUnits = new wxStaticText( this, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_pasteMarginUnits->Wrap( -1 );
|
|
gbSizer2->Add( m_pasteMarginUnits, wxGBPosition( 0, 2 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_pasteMarginRatioLabel = new wxStaticText( this, wxID_ANY, _("Solder paste relative clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_pasteMarginRatioLabel->Wrap( -1 );
|
|
m_pasteMarginRatioLabel->SetToolTip( _("Global clearance ratio between pads and the solder paste as a percentage of the pad size.\nA value of 10 means the clearance value is 10 percent of the pad size.\nThis value can be superseded by local values for a footprint or a pad.\nFinal clearance value is the sum of this value and the absolute clearance value.") );
|
|
|
|
gbSizer2->Add( m_pasteMarginRatioLabel, wxGBPosition( 1, 0 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
|
|
|
|
m_pasteMarginRatioCtrl = new wxTextCtrl( this, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_pasteMarginRatioCtrl->SetToolTip( _("Global clearance ratio between pads and the solder paste as a percentage of the pad size.\nA value of 10 means the clearance value is 10 percent of the pad size.\nThis value can be superseded by local values for a footprint or a pad.\nFinal clearance value is the sum of this value and the absolute clearance value.") );
|
|
|
|
gbSizer2->Add( m_pasteMarginRatioCtrl, wxGBPosition( 1, 1 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
m_pasteMarginRatioUnits = new wxStaticText( this, wxID_ANY, _("%"), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_pasteMarginRatioUnits->Wrap( -1 );
|
|
gbSizer2->Add( m_pasteMarginRatioUnits, wxGBPosition( 1, 2 ), wxGBSpan( 1, 1 ), wxALIGN_CENTER_VERTICAL, 5 );
|
|
|
|
|
|
bSizer3->Add( gbSizer2, 0, wxBOTTOM|wxEXPAND|wxTOP, 5 );
|
|
|
|
|
|
bSizer3->Add( 0, 0, 2, wxEXPAND, 5 );
|
|
|
|
m_staticTextInfoPaste = new wxStaticText( this, wxID_ANY, _("Note: Solder paste clearances (absolute and relative) are added to determine the final clearance."), wxDefaultPosition, wxDefaultSize, 0 );
|
|
m_staticTextInfoPaste->Wrap( -1 );
|
|
bSizer3->Add( m_staticTextInfoPaste, 0, wxALL|wxEXPAND, 5 );
|
|
|
|
|
|
bSizer3->Add( 0, 0, 1, wxEXPAND, 5 );
|
|
|
|
|
|
bMainSizer->Add( bSizer3, 0, wxRIGHT|wxLEFT|wxEXPAND, 5 );
|
|
|
|
|
|
this->SetSizer( bMainSizer );
|
|
this->Layout();
|
|
bMainSizer->Fit( this );
|
|
}
|
|
|
|
PANEL_SETUP_MASK_AND_PASTE_BASE::~PANEL_SETUP_MASK_AND_PASTE_BASE()
|
|
{
|
|
}
|