The angle rotation was always negated. But this is incorrect:
The angle rotation must be negated when flipping around X axis
The angle rotation must be 180 - initial rotation when flipping around Y axis
This bug can break position files and footprint updates,
especially when mixing flipping around Y axis and flipping around X axis.
This method was using a case insensitive comparison to find the pad matching aPadName.
But in netlist we are using case sensitive comparisons to attribute a net to a pad.
So if in the netlist there is a pad name that does not match any footprint pad name using case sensitive comparison but if it matches some pads using case insensitive comparison, the net is not set, but the test to detect non existing pads fails.
Deleting objects from a container will invalidate the iterator that
contains the object. Correct deleting requires capturing the iterator
returned by the erase function.
Fixes: lp:1832331
* https://bugs.launchpad.net/kicad/+bug/1832331
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
When adding an element to a module, we don't need to update the relative
coordinates. Doing so can cause changes when writing to file depending
on rotation and position.
Fixes: lp:1810870
* https://bugs.launchpad.net/kicad/+bug/1810870
This adds a check for contiguous board outlines to the DRC. It also
uses the calculated outline to ensure that traces are not crossing the
outlines.
Fixes: lp:1648055
* https://bugs.launchpad.net/kicad/+bug/1648055
This makes zoom automatique work much better in the footprint
editor, and should improve other things which probably assumed
the bounding box included everything (such as refresh code).
Callers which still want just the module outline should call
GetFootprintRect() instead of GetBoundingBox().
Well, almost anyway. We can't use a pad attribute for them as
that would change the file format. So they're currently
defined as a CONN pad with no copper layers.
However, when figuring out of existing pads should be *treated*
as aperture pads, we just check for no copper layers.
Fixes: lp:1781760
* https://bugs.launchpad.net/kicad/+bug/1781760
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Be consistent with order, formatting, etc.
Remove debug stuff such as zone timestamp and net code.
Clean up misleading pad messages.
(cherry picked from commit 2132109)
Once SELECTION_TOOL has been changed to use EDA_ITEM::GetBoundingBox(),
selection area had to cover the footprint and its ref/value texts,
even hidden ones. To fix this, ref/val strings are taken into account
only in the ViewBBox().
