kicad-source/pcbnew/dialogs/dialog_gendrill.cpp

/////////////////////////////////////////////////////////////////////////////

// Name:        dialog_gendrill.cpp
// Author:      jean-pierre Charras
// Licence:     GPL

#include "fctsys.h"
#include "appl_wxstruct.h"
#include "pcbnew.h"
#include "wxPcbStruct.h"
#include "pcbplot.h"
#include "gendrill.h"

#include "dialog_gendrill.h"


// Keywords for read and write config
#define ZerosFormatKey          wxT( "DrillZerosFormat" )
#define PrecisionKey            wxT( "DrilltPrecisionOpt" )
#define MirrorKey               wxT( "DrillMirrorYOpt" )
#define MinimalHeaderKey        wxT( "DrillMinHeader" )
#define UnitDrillInchKey        wxT( "DrillUnit" )
#define DrillOriginIsAuxAxisKey wxT( "DrillAuxAxis" )

// list of allowed precision for EXCELLON files, when interger format:
// Due to difference between inches and mm,
// there are 2 set of reasonnable precision values, one for inches and one for metric
static DRILL_PRECISION precisionListForInches[] =
{
    DRILL_PRECISION(2,3), DRILL_PRECISION(2,4)
};
static DRILL_PRECISION precisionListForMetric[] =
{
    DRILL_PRECISION(3,2), DRILL_PRECISION(3,3)
};



DIALOG_GENDRILL::DIALOG_GENDRILL( WinEDA_PcbFrame* parent ) :
    DIALOG_GENDRILL_BASE( parent )
{
    m_Parent = parent;

    SetReturnCode( 1 );
    initDialog();
    GetSizer()->SetSizeHints( this );
    Centre();
}


// Static members of DIALOG_GENDRILL
int DIALOG_GENDRILL:: m_UnitDrillIsInch = true;
int DIALOG_GENDRILL:: m_ZerosFormat     = DECIMAL_FORMAT;
bool DIALOG_GENDRILL::m_MinimalHeader   = false;
bool DIALOG_GENDRILL::m_Mirror = true;
bool DIALOG_GENDRILL::m_DrillOriginIsAuxAxis = false;
int DIALOG_GENDRILL:: m_PrecisionFormat = 1;

/*!
 * DIALOG_GENDRILL destructor
 */

DIALOG_GENDRILL::~DIALOG_GENDRILL()
{
    UpdateConfig();
}


/*!
 * Member initialisation
 */

void DIALOG_GENDRILL::initDialog()
{
    SetFocus(); // Under wxGTK: mandatory to close dialog by the ESC key
    wxConfig* Config = wxGetApp().m_EDA_Config;

    if( Config )
    {
        Config->Read( ZerosFormatKey, &DIALOG_GENDRILL::m_ZerosFormat );
        Config->Read( PrecisionKey, &DIALOG_GENDRILL::m_PrecisionFormat );
        Config->Read( MirrorKey, &DIALOG_GENDRILL::m_Mirror );
        Config->Read( MinimalHeaderKey, &DIALOG_GENDRILL::m_MinimalHeader );
        Config->Read( UnitDrillInchKey, &DIALOG_GENDRILL::m_UnitDrillIsInch );
        Config->Read( DrillOriginIsAuxAxisKey, &DIALOG_GENDRILL::m_DrillOriginIsAuxAxis );
    }
    InitDisplayParams();
}

/* some param values initialization before display dialog window
 */
void DIALOG_GENDRILL::InitDisplayParams( void )
{
    wxString msg;

    m_Choice_Unit->SetSelection( m_UnitDrillIsInch ? 1 : 0 );
    m_Choice_Precision->SetSelection( m_PrecisionFormat );
    m_Choice_Zeros_Format->SetSelection( m_ZerosFormat );
    if( m_ZerosFormat == DECIMAL_FORMAT )
        m_Choice_Precision->Enable( false );

    UpdatePrecisionOptions( );

    m_Check_Minimal->SetValue( m_MinimalHeader );

    if( m_DrillOriginIsAuxAxis )
        m_Choice_Drill_Offset->SetSelection( 1 );

    m_Check_Mirror->SetValue( m_Mirror );

    m_ViaDrillValue->SetLabel( _( "Use Netclasses values" ) );

    m_MicroViaDrillValue->SetLabel( _( "Use Netclasses values" ) );

    msg.Empty();
    msg << g_pcb_plot_options.HPGL_Pen_Num;
    m_PenNum->SetValue( msg );

    msg.Empty();
    msg << g_pcb_plot_options.HPGL_Pen_Speed;
    m_PenSpeed->SetValue( msg );

    // See if we have some buried vias or/and microvias, and display
    // microvias drill value if so
    m_ThroughViasCount = 0;
    m_MicroViasCount   = 0;
    m_BlindOrBuriedViasCount = 0;
    for( TRACK* track = m_Parent->GetBoard()->m_Track; track != NULL;
        track = track->Next() )
    {
        if( track->Type() != TYPE_VIA )
            continue;
        if( track->Shape() == VIA_THROUGH )
            m_ThroughViasCount++;
        else if( track->Shape() == VIA_MICROVIA )
            m_MicroViasCount++;
        else if( track->Shape() == VIA_BLIND_BURIED )
            m_BlindOrBuriedViasCount++;
    }

    m_MicroViaDrillValue->Enable( m_MicroViasCount );

    // Pads holes round:
    m_PadsHoleCount = 0;
    for( MODULE* module = m_Parent->GetBoard()->m_Modules;
        module != NULL; module = module->Next() )
    {
        for( D_PAD* pad = module->m_Pads; pad != NULL; pad = pad->Next() )
        {
            if( pad->m_DrillShape == PAD_CIRCLE )
            {
                if( pad->m_Drill.x != 0 )
                    m_PadsHoleCount++;
            }
            else
                if( MIN( pad->m_Drill.x, pad->m_Drill.y ) != 0 )
                    m_PadsHoleCount++;
        }
    }

    msg = m_PadsCountInfoMsg->GetLabel();
    msg << wxT( " " ) << m_PadsHoleCount;
    m_PadsCountInfoMsg->SetLabel( msg );

    msg = m_ThroughViasInfoMsg->GetLabel();
    msg << wxT( " " ) << m_ThroughViasCount;
    m_ThroughViasInfoMsg->SetLabel( msg );

    msg = m_MicroViasInfoMsg->GetLabel();
    msg << wxT( " " ) << m_MicroViasCount;
    m_MicroViasInfoMsg->SetLabel( msg );

    msg = m_BuriedViasInfoMsg->GetLabel();
    msg << wxT( " " ) << m_BlindOrBuriedViasCount;
    m_BuriedViasInfoMsg->SetLabel( msg );
}

/* Save drill options: */
void DIALOG_GENDRILL::UpdateConfig()
{
    SetParams();

    wxConfig* Config = wxGetApp().m_EDA_Config;

    if( Config )
    {
        Config->Write( ZerosFormatKey, m_ZerosFormat );
        Config->Write( PrecisionKey, m_PrecisionFormat );
        Config->Write( MirrorKey, m_Mirror );
        Config->Write( MinimalHeaderKey, m_MinimalHeader );
        Config->Write( UnitDrillInchKey, m_UnitDrillIsInch );
        Config->Write( DrillOriginIsAuxAxisKey, m_DrillOriginIsAuxAxis );
    }
}

/*!
 * wxEVT_COMMAND_RADIOBOX_SELECTED event handler for ID_RADIOBOX
 */

void DIALOG_GENDRILL::OnSelDrillUnitsSelected( wxCommandEvent& event )
{
    UpdatePrecisionOptions( );
}


/*!
 * wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_OK
 */

void DIALOG_GENDRILL::OnOkClick( wxCommandEvent& event )
{
    GenDrillOrReportFiles( );
}


/*!
 * wxEVT_COMMAND_BUTTON_CLICKED event handler for wxID_CLOSE
 */

void DIALOG_GENDRILL::OnCancelClick( wxCommandEvent& event )
{
    UpdateConfig();     /* Save drill options: */
    event.Skip();       // Process the default cancel event (close dialog)
}


/*!
 * wxEVT_COMMAND_RADIOBOX_SELECTED event handler for ID_SEL_ZEROS_FMT
 */

void DIALOG_GENDRILL::OnSelZerosFmtSelected( wxCommandEvent& event )
{
    UpdatePrecisionOptions( );
}


void DIALOG_GENDRILL::UpdatePrecisionOptions( )
{
    if( m_Choice_Unit->GetSelection()== 1 )     // Units = inches
    {
        /* inch options   */
        m_Choice_Precision->SetString( 0, precisionListForInches[0].GetPrecisionString() );
        m_Choice_Precision->SetString( 1, precisionListForInches[1].GetPrecisionString() );
    }
    else
    {
        /* metric options */
        m_Choice_Precision->SetString( 0, precisionListForMetric[0].GetPrecisionString() );
        m_Choice_Precision->SetString( 1, precisionListForMetric[1].GetPrecisionString() );
    }
    if( m_Choice_Zeros_Format->GetSelection()==DECIMAL_FORMAT )
        m_Choice_Precision->Enable( false );
    else
        m_Choice_Precision->Enable( true );
}


void DIALOG_GENDRILL::SetParams( void )
{
    wxString msg;
    long     ltmp;

    m_UnitDrillIsInch = (m_Choice_Unit->GetSelection() == 0) ? FALSE : TRUE;
    m_MinimalHeader   = m_Check_Minimal->IsChecked();
    m_Mirror = m_Check_Mirror->IsChecked();
    m_ZerosFormat = m_Choice_Zeros_Format->GetSelection();
    m_DrillOriginIsAuxAxis = m_Choice_Drill_Offset->GetSelection();
    m_PrecisionFormat = m_Choice_Precision->GetSelection();

    msg = m_PenSpeed->GetValue();
    if( msg.ToLong( &ltmp ) )
        g_pcb_plot_options.HPGL_Pen_Speed = ltmp;
    msg = m_PenNum->GetValue();

    if( msg.ToLong( &ltmp ) )
        g_pcb_plot_options.HPGL_Pen_Num = ltmp;
    if( m_Choice_Drill_Offset->GetSelection() == 0 )
        m_FileDrillOffset = wxPoint( 0, 0 );
    else
        m_FileDrillOffset = m_Parent->m_Auxiliary_Axis_Position;

    // get precision
    int idx = m_Choice_Precision->GetSelection();
    if( m_UnitDrillIsInch )
        m_Precision = precisionListForInches[idx];
    else
        m_Precision = precisionListForMetric[idx];
}